Many people who face this kind of price tag wonder if they can get away with patching their pipes. But if the sewer line is old there are almost certainly toilet repair other bad spots that will give you problems now or in the near future. A series of patch jobs isn't cheap. In the long run, it just makes more sense to replace the entire line.
Turn off the water to the water line repair heater or if the valve is not working turn off the water to the house. If the valve is not working it will need to be replaced. In a future article we will discuss how to replace your valve.
One other common design that is considered "washerless" was made famous by Delta and copied by several other makers. It uses little "cup" seals that fit over springs recessed in the back of the valve body. The springs press these "seals" against the cartridge and regulate the flow through little tapered openings in the cartridge. If you have one of these and it's dripping, changing these springs and seals will usually correct it. Here's a tip. Once you have the cartridge out of the way, insert a phillips screwdriver into the seal and pop both the seal and spring out. Stick the new ones on the end of the screwdriver to help guide them into place. This is especially helpful if you don't have long slender fingers.
If you do experience a broken pipe, you must act quickly to prevent further water damage to your home or business. The first thing you must do is shut off the water immediately. Know where the water shut off valve is located and make sure all members of the household are aware of its location and how to shut it off.
A broken water supply line can cause water to spurt from the line connecting the toilet to the main water valve. The first step to repair this leak is to shut off the water line repair supply valve. This will stop the flow of water to the toilet. Next, flush the toilet to remove the water from the bowl and hold down the handle until it is completely empty.
To avoid this, make sure your toilets screws are always tight and repair any leaks right away. A new wax ring should also be installed any time the toilet is removed such as if you happen to be replacing an old toilet with a newer model that you liked such as a more modern KOHLER brand. Replacing your toilets wax ring is pretty simple to do and can pretty much be done in less than an hour by the average person.
Sometimes there can be complications of broken toilet flanges, closet bolts or rotted sub-flooring. If you find any of that in your situation, it will need to be repaired before reinstalling the toilet.